POSTED BY:

COMMENTS:

0

POST DATE:

July 15, 2018

Vacuum Circuit Breaker

Evolis Circuit Breaker
Evolis MV Circuit Breaker
In a Vacuum circuit breaker VCB vacuum interrupters are used for breaking and making load and fault currents. When the contacts in vacuum interrupter separate, the current to be interrupted initiates a metal vapour arc discharge and flows through the plasma until the next current zero. The arc is then extinguished and the conductive metal vapour condenses on the metal surfaces within a matter of micro seconds. As a result the dielectric strength in the breaker builds up very rapidly.
The properties of a vacuum interrupter depend largely on the material and form of the contacts. Over the period of their development, various types of contact material have been used. At the moment it is accepted that an oxygen free copper chromium alloy is the best material for High voltage circuit breaker. In this alloy , chromium is distributed through copper in the form of fine grains.
Low Voltage Switchgear
his material combines good arc extinguishing characteristic with a reduced tendency to contact welding and low chopping current when switching inductive current. The use of this special material is that the current chopping is limited to 4 to 5 Amps. At current under 10KA, the Vacuum arc burns as a diffuse discharge. At high values of current the arc changes to a constricted form with an anode spot. A constricted arc that remain on one spot for too long can thermically over stress the contacts to such a degree that the deionization of the contact zone at current zero can no longer be guaranteed . To overcome this problem the arc root must be made to move over the contact surface. In order to achieve this, contacts are so shaped that the current flow through them results in a magnetic field being established which is at right angles to the arc axis. This radial field causes the arc root to rotate rapidly around the contact resulting in a uniform distribution of the heat over its surface. Contacts of this type are called radial magnetic field electrodes and they are used in the majority of circuit breakers for medium voltage application. A new design has come in Vacuum interrupter, in which switching over the arc from diffusion to constricted state by subjecting the arc to an axial magnetic field. Such a field can be provided by leading the arc current through a coil suitably arranged outside the vacuum chamber. Alternatively the field can be provided by designing the contact to give the required contact path. Such contacts are called axial magnetic field electrodes. This principle has advantages when the short circuit current is in excess of 31.5 KA. Source: EEP

Author

Related Post

Medium voltage Distribution system

Medium voltage Distribution system

Until recently oil circuit breakers were used in large numbers for Medium voltage Distribution system in many 
By

সিলেটে বজ্রপাতে গ্যাস লাইনে আগুন, ৫ জনের মৃত্যু

গোলাপগঞ্জ থানার ওসি ফজলুল হক শিবলী জানান, শনিবার রাত ৩টার দিকে উপজেলার লক্ষণাবন্দ ইউনিয়নের ক্লাববাজার এলাকায় এ ঘটনা ঘটে। নিহতরা হলেন-...
By

মহান মে দিবস আজ

১ মে ২০১৮, মঙ্গলবার বিশ্বের কোটি কোটি শ্রমজীবী মানুষের অধিকার ও দাবি আদায়ের মহান মে দিবস আজ। বিশ্বব্যাপী শ্রমজীবী মানুষের আন্দোলন-সংগ্রামে...
By

বৈদ্যুতিক নিরাপত্তায় করণীয়

বৈদ্যুতিক নিরাপত্তায় করণীয়: বর্তমান সভ্যতার আধুনিক জীবনব্যবস্থায় বিদ্যুৎ একটি আশীর্বাদস্বরূপ। বিদ্যুৎ বিহীন একটি মুহূর্ত এখন কল্পনাতীত। আবার এই বিদ্যুৎ থেকেই...
By